MTF files

MDT Endcap files for MTF Database

Click on the title to jump to the format description for each file type.

CSM/DCS serial number files:	SN_MTF1.txt (revised Feb 9, 2006)
	SN_MTF2.txt (July 27, 2006)
SN_README.txt	SN_MTF_FINAL1.txt (Jan 30, 2007) EIL4, EMS, EML
	SN_MTF_FINAL2.txt (Feb 6, 2007) EOS, EOL
Mezanine card serial number files:	MEZZSN_MTF1.txt (revised Feb 9, 2006)
	MEZZSN_MTF2.txt (July 18, 2006)
MEZZSN_README.txt	MEZZSN_MTF_FINAL1.txt (Feb 6, 2007) EIL4, EMS, EML
	MEZZSN_MTF_FINAL2.txt (Feb 6, 2007) EOS, EOL
HVHH card serial number files:	HVHH_MTF1.txt (updated Feb 7, 2006)
	HVHH_MTF2.txt (updated May 15, 2006)
HH_README.txt	HVHH_MTF_FINAL1.txt (Feb 1, 2007) EIL4, EMS, EML
	HVHH_MTF_FINAL2.txt (Feb 6, 2007) EOS, EOL
ROHH card serial number files:	ROHH_MTF1.txt (updated Feb 7, 2006)
	ROHH_MTF2.txt (updated May 15, 2006)
HH_README.txt	ROHH_MTF_FINAL1.txt (Feb 1, 2007) EIL4, EMS, EML
	ROHH_MTF_FINAL2.txt (Feb 6, 2007) EOS, EOL
Temperature sensor files:	TSENSOR_MTF1.txt
	TSENSOR_MTF2.txt Dec 11, 2006 Replaces old version below - has correct locations
	Old Tsensor MTF2 file incorrect version - sensor locations were wrong
	TSENSOR_MTF_FINAL1.txt (Mar 8, 2007) EM, EIL4 Washington Tsensors
Magnetic Field sensor files:	BSENSOR_MTF1.txt (revised Feb 28, 2006)
	BSENSOR_MTF2.txt (July 18, 2006)

General Notes:

The SN_MTF1.txt, MEZZSN1.txt, HVHH_MTF1.txt, and ROHH_MTF1.txt files are the same as the old SN_MTF.txt, MEZZSN.txt, HVHH_MTF.txt, and ROHH_MTF.txt except for some minor differences.
Not all endcap chamber data is present because some chambers are still being commisionned.
Files have been checked for duplicate IDs.

Data formats:

1. SN_MTF#.txt => CSM and DCS IDs

Format: IDMechPar MDT_ID CSM_MB CSM_ID DCS_NODE NIKHEF_ID BarCode

IDMechPar	= Chamber name
MDT_ID	= MDTSerialNumber, e.g. ATLM.M.EML.1C03
CSM_MB	= CSM Motherboard Serial Number e.g EU-MB-04-20-0160
CSM_ID	= CSM Serial Number e.g US-CSM-04-11-0187
DCS_NODE	= DCS node number
NIKHEF_ID	= DCS Nikhef ID, e.g. D028e
BarCode	= DCS barcode e.g. 20MMFIAD001289

These numbers are verified to have the correct format.

= Calibration constant 1 (offset)

2. MEZZSN_MTF#.txt => Mezzanine card IDs

Format: IDMechPar Mezz_ID ML STEP CSM_CH CABLE_LEN

IDMechPar	= Chamber name
Mezz_ID	= Mezz card serial number
ML	= Multilayer [1:2]
STEP	= Position of card on ML in order of increasing chamber Z coordinate. [1:N]
CSM_CH	= Readout channel on CSM card
CABLE_LEN	= Length of CSM cable in cm

Mezz IDs are verified to have the correct format.

3. HVHH_MTF#.txt => High Voltage Hedgehog Card IDs

Format: IDMechPar ID ML STEP TYPE CSM_CH

IDMechPar	= Chamber name
ID	= HVHH ID number
ML	= Multilayer [1:2]
STEP	= Position of card on ML in order of increasing chamber Z coordinate. [1:N]
TYPE	= Type of card (layout) [1:2]
CSM_CH	= Readout channel on CSM card

Notes:
a. Chambers EIS1, EIS2, EIL1, EIL2, and most EML5 did not
     have HVHH IDs recorded. There is no plan to get this data.
b. HVHH IDs are hand-written on cards, and therefore have
     a higher probability of errors during writing or recording.
     We have checked for duplicate or wrong IDs.
c. Here is a list of duplicate or missing HVHH IDs which have
been excluded from the MTF files above: hvhh_dup_list.txt
Missing IDs are given as ID 0000. File also lists which chambers
are recorded as having the duplicate IDs.

4. ROHH_MTF#.txt => Readout Hedgehog Card IDs
   Same format as HVHH file. Here is a list of duplicate or missing
ROHH IDs: rohh_dup_list.txt

5. TSENSOR_MTF#.txt => Temperature sensors

Format: IDMechPar ID Type Channel Location Const1 Const2 Flag

IDMechPar	= Chamber name
ID	= Sensor ID number
Type	= 1=>Washington Tsensor 2=>Brandeis Tsensor
Channel	= Readout channel
Location	= Location on chamber (number to be defined on a diagram)
Const1	= Calibration constant 1 (offset)
Const2	= Calibration constant 2 (slope)
Flag	= bit flag of sensor status

Notes:

Washington temperature sensors are installed only on EML1, EML2, EML3, EML4, EML5, EMS2, EMS3, EMS4, EMS5, and EIL4 chambers.
Brandeis temperature sensors are installed only on EIS1, EIS2, EIL1, EIL2, EMS1, and EML1 chamber. Note that EML1 has both Washington and Brandeis T sensors. However EML1 Brandeis T sensors are not installed at the same locations as on the other chambers with Brandeis T sensors.
Nikhef temperature sensors are installed on the EO chambers. These do not have ID numbers and so will not be listed in the Tsensor files.
For more information on endcap T sensors read this.

6. BSENSOR_MTF#.txt => Magnetic field sensors

Format: IDMechPar ID Type Channel Location Orientation

IDMechPar	= Chamber name
ID	= Sensor ID number (8 digit hex number)
Channel	= Readout channel [0:3]
Location	= Location on chamber (defined on Brandeis chamber diagrams)
Orientation	= Sensor orientation [-1,1]

Chambers have either 0, 2, or 4 Bsensors.